Integrates with ProActive, M.C.Miller’s corrosion control data management application. Data-types are customizable for each of your test sites and each test site can be GPS position stamped.

High-resolution date/time stamped photos can be taken at your test sites during a route and recorded images are posted directly to the ProActive database.

NOTE: This application can be purchased here or through a sales representative.

This application is available for purchase here on our site, or through a sales representative. Should you make your purchase here on our site, you will be required to pay using a credit card, and a 3% CC fee will be applied. You will still need to download the installation file from the link below, but you will not be able to complete the installation process until you receive an authorization code from M. C. Miller. Depending on when you place the order, this may take up to 72 hours to be generated (if the purchase was made after working hours on Friday). This code will need to be entered during the installation procedure to activate the application.

Download Application

NOTE: FOR PROACTIVE SOFTWARE USERS:

In order to import your data from the tablet into ProActive, you may need to install the following driver software on your PC:

Download Android™ Driver

1. Download the ‘AndroidDriverinstall.zip’ file and UNZIP it
2. The ProActive PC that will be used to connect the Android tablet is the PC that needs to be updated
3. In that PC, close ‘ProActive’ if it is open
4. Run the ‘AndroidDriverInstall.exe’ from the previously unzipped downloaded
5. Once successfully finished/installed, you should be able to run ‘ProActive’ and the ‘Android’ entry should be available for selection in the ‘Data Logger’ drop down list for the ‘Get Reads’ and ‘Surveys’ functions

The Test Site Survey application requires our ProActive database management solution to build testing routes with the proper data prompts and then collective data import for reporting and analysis.